ZERO-OHM RESISTORS
零歐姆電阻
| INTRODUCTION | 简介 |
| Zero ohms are developed for the interconnection device between points on a P.C. board as jumper wires or crossovers. | 零歐姆是被應用在設計印刷電路板上，相串聯二點之間作為跳線或橫越之用。 |
|
They offer a quick solution to the following problems: |
可以很快解決下列問題: |
| (1) Inability to connect two points on a P.C. board due to other circuit paths which must be crossed over. (2) An after-the-fact design change that requires new point connections. (3) Circuit tuning by changing point connections. |
(1) 因其它電路線徑必須跨越在電路版上，不能相連之二點。 (2) 設計完成後因需改變新聯繫點時。 (3) 由改變聯繫點，而須改變電路時。 |
|
Zero ohms are especially suited for automatic machine insertion. DIMENSIONS |
零歐姆特別適用於插件自動機械上。 |
 |
|
|
DIMENSION (mm)
|
||||
|
L ± 1
|
D ± 0.5
|
H(MIN)
|
d
|
|
|
1/8W
|
3.0
|
1.5
|
25
|
0.43± 0.05
|
|
1/4W
|
5.5
|
2.0
|
25
|
0.50± 0.10
|
SPECIFICATIONS
| Resistance | 電阻值------------- 0.005Ω |
| Insulation Resistance | 絕緣電阻抗---------10,000MegΩ |
| Dielectric Strength | 電壓強-------------500V |
| Solvent Resistance | 溶解電阻-----------no damage |
| Terminal Strength | 電極強度-----------no damage |
| Soldering | 焊接度-------------good tinning |
