Power Module

A1468LK-T – Three-Wire, True Zero-Speed, Differential Peak-Detecting Sensor IC

Allegro MicroSystems, LLC Corporation introduces an optimized Hall-effect sensing IC providing you with a user-friendly solution with regard to digital ring-magnet sensing, as well as when coupled with the magnet, ferromagnetic target realizing, in three-wire applications. The small device package can easily be assembled into software for use in conjunction with a wide variety of target shapes and sizes. Allegro’s A1468 sensor IC is targeted at the automotive market and is also designed and optimized for motor bike applications.

The Integrated Circuit incorporates dual Hall-effect elements with a 2.2 mm spacing as well as signal processing which switches in response for you to differential magnetic signals manufactured by ring magnet north and south poles. The circuitry contains a sophisticated digital circuit to reduce system offsets, for you to calibrate the gain for air gap-independent move points, and to accomplish true zero-speed operation by way of peak detecting criteria. Signal optimization comes about at power-on through the combination of offset and acquire adjust, and is taken care of throughout the operating occasion with the use of a running-mode calibration.The running-mode calibration provides immunity to environmental effects for example micro-oscillations of the target or perhaps sudden air difference changes. The device is actually ideally suited to getting speed and obligation cycle information inside ring-magnet-based speed, position, and also timing applications, like in speedometers.

Allegro’s A1468LK-T is available in the 4-pin through hole SIP package (suffix K) and is also priced at $1.28 throughout quantities of 1,000.

There are no comments now

Leave a message

Loading expression...
qrcode